Interrupt with PIC Microcontroller

Interrupt is a very common feature in the mocrocontroller world.Today we will discus about 

this feature also give you a example which will be very helpful for this tutorial

mikroC Code: 

void main()
{
  TRISC = 0; // To configure PORTC as output port
  OPTION_REG.INTEDG = 1; // Set Rising Edge Trigger for INT
  INTCON.GIE = 1; // Enable The Global Interrupt
  INTCON.INTE = 1; // Enable INT
  while(1)
  {
    PORTC = 0x00; //Set some value at PortD
  }
}

void interrupt() //  ISR
{
 INTCON.INTF=0; // Clear the interrupt 0 flag
 PORTC=~PORTC; // Invert (Toggle) the value at PortD
 Delay_ms(1000); // Delay for 1 sec
}